Installation Guide - No Tools Needed!
Click for the Installation Guide PDF file.

10. Install the side ad/number and lens. First insert bottom lens clips,
    then carefully press down on the top clips until they hook into slots.
    
    
     
11. Install front and back ad plates and lenses. Your ad either sticks to the
    back of the ad plate, or is held in place by the ad plate edging and lens.
    Carefully push the lens into the housing.

       Add Plate

Replacing the ad:
To remove the front and rear ad plates and lenses, first remove the side lens. Through the finger holes, the ad plates can be pushed outwards and away from the housing.

To replace the reel, detach it from the singles stick. Then remove the front lens, gently pull back the clip and slide the reel out from its slot. Slide the new reel into the slot and adjust the cable again.